DAB ROBERTS Specifications download pdf (Page 20)

Operating your sound system - Search tuning FM

1. Fully extend the wire aerial located on the rear of your sound system.

Place the wire antenna so that it is as straight as possible extending

either above or below the sound system.

2. Press and release the On / Off button to switch on your sound system

and press and release the Function button until the FM mode is

selected.

3. Press and hold the Tuning Up button for 2-3 seconds to cause your

radio to search from low frequency to high frequency and to stop

automatically when it ﬁ nds a station of sufﬁ cient strength. After a few

seconds the display will update. The display will show the frequency

of the signal found. If the signal is strong enough and there is RDS

data present then the radio may display the station name.

4. To ﬁ nd other stations press the Tuning Up button as before.

5. Press and hold the Tuning Down button for 2-3 seconds to cause

your radio to search from high frequency to low frequency and to stop

automatically when it ﬁ nds a station of sufﬁ cient strength.

• Alternatively press and release the Tuning Up or Down button then

press and release the Auto button (on the remote) or the Auto Tune

control (on the sound system).

6. When the end of the waveband is reached your radio will recommence

tuning from the opposite end of the waveband.

7. Adjust the Volume to the required setting.

8. To switch off your radio press and release the On / Off button.

Note:

If you ﬁ nd that FM reception is poor, try repositioning the wire aerial.Fully

extend the wire aerial for optimum reception. If you ﬁ nd that an FM broadcast

has a lot of background hiss, this may often be reduced by setting the

radio into Mono reception mode for the current FM station. Please refer

to the section 'Stereo / Mono setting - FM' on page 22 for further details.

If the received station is received in stereo the stereo icon

will show

on the display.

3,4

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

No comments

DAB ROBERTS Specifications Page 20